The current version of EditTools is nearly 1 year old. Over the past months, a lot of work has gone into improvements to existing functions and in creating new functions. Shortly, a new version of EditTools will be released (it will be a free upgrade for registered users).
New in the forthcoming version is the Find Duplicate References macro, which is listed as Duplicate Refs on the References menu as shown here:
Duplicate Refs on the References Menu
The preliminaries
The macro works with both unnumbered and numbered reference lists (works better when the numbers are not autonumbers, but it does work with autonumbered lists). It also works with the reference list left in the manuscript with the text paragraphs and when the reference list has been moved temporarily to its own file (it works, like other reference-specific macros in EditTools, better when the references are moved to a separate, references-only file).
Like all macros, the Find Duplicate References macro is “dumb”; that is, it only finds identical references. The following image shows references 19 and 78 as submitted for editing. (For all images in this essay: For a larger, more readable image, right-click on the image and click “Open link in new tab.” This will open a larger version of the image in a new tab that can be kept open as you read the description of the image.)
Original References
As the image shows, although references 19 and 78 are identical references and are likely to appear identical to an editor, they will not appear identical to the Find Duplicate References macro. Items 1 and 2 show a slight difference in the author name (19: “Infant”, 78: “Infantile”). The journal names are different in that in 19 the abbreviated name is used (#3) whereas in 78 the name is spelled out (#4). Finally, as #5 and #6 show, there are a couple of differences in the cite information, namely, the order, the use of a hyphen or en-dash to indicate range, and the final page number.
Because any one of these differences would prevent the macro from pairing these references and marking them as potentially identical, it is important that the references go through a round of editing first. After editing, which for EditTools users should also include running the Journals macro, the references are likely to look like this:
The References After Editing
If you compare the same items (1 and 2, 3 and 4, 5 and 6) in the above image, you will see that they now better match. (Ignore the inserted comments for now; they are discussed below.) One more step is required before the Find Duplicate References macro can be run — you need to accept all of the changes that were made. Remember that in Word, when changes are made with Tracking on, the material marked as deleted is not yet deleted; consequently, when the macro is run, the Tracked items will interfere (as will any comments, which also need to be deleted). The best method is to (1) save the tracked version, (2) accept all the changes, (3) use EditTools’ Comment Editor to delete any comments, and (4) save this clean version to run the Find Duplicate References macro.
After accepting all changes and deleting the comments, the entries for references 19 and 78 look like this:
The References After Changes Accepted
Running the macro
When the Find Duplicate References macro is run, the following message box appears.
Find Duplicate References Message Box
To run the macro, the macro has to be told where to begin and end its search. If the references are in a separate file from the rest of the manuscript, check the box indicating that the references are in a standalone document (#5) and click Run (#6). If the references are in a file with other material, use bookmarks to mark the beginning and ending of the list as instructed at the top of the message box (#1). To make it easier, the Bookmarks macro now has buttons to insert these bookmarks:
The dupBegin and dupEnd Bookmark Insert Buttons
The Find Duplicate References macro matches a set number of characters, including spaces. The default is 120 (#4) but you can change the number to 36, 48, 60, 72, 84, 96, or 108 using the dropdown arrow shown at #4 in the Find Duplicate References message box above.
The macro does a two-pass search, one from the beginning of the reference and another from the end of the reference, which is why a list of duplicates may have repetitions.
The results of the search appear like this:
List of Possible Duplicate References
(They appear as tracked changes only if the macro is run with Tracking on; if Tracking is off, the results appear as normal text.) Note the title of the duplicates is “Duplicate Entries (Nondefinitive).” The reason for “Nondefinitive” is to remind you that the macro is “dumb” and there is no guarantee that the list includes all duplicates or that all listed items are duplicated. Much of the macro’s accuracy depends on the consistency of editing, including formatting.
For the examples in this essay, the Find Duplicate References macro was run on a list of 735 references and the list of possibilities shown represents those likely duplicate references the macro found. Note that references 19 and 78 were found (#19 and #78 indicate the portions of those references found duplicated by each pass of the macro); however, if, for example, in editing the page range separator in #19 was left as an en-dash in reference 19 and in reference 78 as a hyphen, the macro would not have listed the material at #19 as there would not have been a match. Similarly, if the author name in reference 19 had been left as “Infant” and in reference 78 as “Infantile”, the macro would not have listed the material at #78 as there would not have been a match.
The next step is for the editor to determine which of the listed possibilities are duplicates. This is done using Word’s Find Navigation pane, as shown here:
Verifying Duplicate References
Copy part or all of what was found (#1) into the Find field (#2). Find will display the search results (“3 matches”) (#3); clicking the Browse button (the rightmost button at #3) lists the three matches found (#4 to #6). The first entry (#4) is always the text in the duplicates list (#1), which means that, in this example, the possible duplicates are #5 and #6. Clicking on the text marked #5 to see the complete text of that entry. Then compare that text to the text of the reference at #6. (It is possible for the macro to find more than two possible matches for the same text — and all, some, or none may be duplicates.)
Tip: Use comments to track duplicates
When I find a duplicate, I insert a prewritten, standardized comment (using EditTools’ Insert Query) to tell the client that references x and y are duplicates and that I am deleting one and renumbering it (see image below for a sample comment). I insert the comment at each of the duplicate references, although I slightly modify the comment so that it is appropriate for the reference to which it is being attached. The comment shown below is inserted at reference 78 and its language is appropriate for that reference. It tells the client that references 19 and 78 are identical and that reference 78 has been deleted and renumbered as 19. This type of comment is added to the version (e.g., the Track Changes version) of the reference list that will be given the client. The comment is added to the appropriate references as duplication is confirmed.
The Inserted Comment
The comment, in addition to serving as a message to the client, serves as a reminder message during editing of the manuscript. Duplicate references require renumbering so as to keep reference callouts in number order. For example, it may be that reference 78 is called out after the callout for reference 10 and before that for 19. In that case, reference 78 would be moved to position 11 in the list and renumbered as 11 and the comment would be modified (easy to do using EditTools’ Comment Editor). A prewritten note (another new EditTools feature) would be inserted at point 78 in EditTools’ Reference Number Order Check and reference 19 would be marked as deleted, the inserted comment (see above) would be modified, and a note would be added to Reference Number Order Check at point 19. (See the discussion below about the report.)
When editing of the manuscript is finished, have the Reference Number Order Check macro export a renumbering report to send with the edited file to the client. A partial sample report is shown here:
Sample Partial Renumbering Report
Every report bears the creator’s identification information (#1) and file title (#2). You set the creator information once and it remains the same for every report until you change it using a manager. The file title is set each time you create a report.
As the report shows, reference 78 was deleted and all callouts numbered 78 were renumbered as 19 (#3). The prewritten, standard message (a new feature) can be inserted with a mouse click; only the numbers need to be inserted or modified. The report shows that the renumbering stopped at callout 176 (#4) and started again at 197 (#5). Number 6 shows another deletion and renumbering.
Clients like these reports because it makes it easy for authors, proofreaders, and others involved in the production process to track what was done.
The Find Duplicate References macro is a handy addition to EditTools. While it is easy in very short reference lists to check for duplicate references, as the number of references grows, checking for duplicates becomes increasingly difficult and time-consuming. The Find Duplicate References macro saves a lot of time, thereby increasing an editor’s profits.
Richard Adin, An American Editor
Like this:
Like Loading...
An American Editor
EditTools: Duplicate References — A Preview
Tags: Bookmarks, Comment Editor, EditTools, Find Duplicate References macro, Journals macro
The current version of EditTools is nearly 1 year old. Over the past months, a lot of work has gone into improvements to existing functions and in creating new functions. Shortly, a new version of EditTools will be released (it will be a free upgrade for registered users).
New in the forthcoming version is the Find Duplicate References macro, which is listed as Duplicate Refs on the References menu as shown here:
Duplicate Refs on the References Menu
The preliminaries
The macro works with both unnumbered and numbered reference lists (works better when the numbers are not autonumbers, but it does work with autonumbered lists). It also works with the reference list left in the manuscript with the text paragraphs and when the reference list has been moved temporarily to its own file (it works, like other reference-specific macros in EditTools, better when the references are moved to a separate, references-only file).
Like all macros, the Find Duplicate References macro is “dumb”; that is, it only finds identical references. The following image shows references 19 and 78 as submitted for editing. (For all images in this essay: For a larger, more readable image, right-click on the image and click “Open link in new tab.” This will open a larger version of the image in a new tab that can be kept open as you read the description of the image.)
Original References
As the image shows, although references 19 and 78 are identical references and are likely to appear identical to an editor, they will not appear identical to the Find Duplicate References macro. Items 1 and 2 show a slight difference in the author name (19: “Infant”, 78: “Infantile”). The journal names are different in that in 19 the abbreviated name is used (#3) whereas in 78 the name is spelled out (#4). Finally, as #5 and #6 show, there are a couple of differences in the cite information, namely, the order, the use of a hyphen or en-dash to indicate range, and the final page number.
Because any one of these differences would prevent the macro from pairing these references and marking them as potentially identical, it is important that the references go through a round of editing first. After editing, which for EditTools users should also include running the Journals macro, the references are likely to look like this:
The References After Editing
If you compare the same items (1 and 2, 3 and 4, 5 and 6) in the above image, you will see that they now better match. (Ignore the inserted comments for now; they are discussed below.) One more step is required before the Find Duplicate References macro can be run — you need to accept all of the changes that were made. Remember that in Word, when changes are made with Tracking on, the material marked as deleted is not yet deleted; consequently, when the macro is run, the Tracked items will interfere (as will any comments, which also need to be deleted). The best method is to (1) save the tracked version, (2) accept all the changes, (3) use EditTools’ Comment Editor to delete any comments, and (4) save this clean version to run the Find Duplicate References macro.
After accepting all changes and deleting the comments, the entries for references 19 and 78 look like this:
The References After Changes Accepted
Running the macro
When the Find Duplicate References macro is run, the following message box appears.
Find Duplicate References Message Box
To run the macro, the macro has to be told where to begin and end its search. If the references are in a separate file from the rest of the manuscript, check the box indicating that the references are in a standalone document (#5) and click Run (#6). If the references are in a file with other material, use bookmarks to mark the beginning and ending of the list as instructed at the top of the message box (#1). To make it easier, the Bookmarks macro now has buttons to insert these bookmarks:
The dupBegin and dupEnd Bookmark Insert Buttons
The Find Duplicate References macro matches a set number of characters, including spaces. The default is 120 (#4) but you can change the number to 36, 48, 60, 72, 84, 96, or 108 using the dropdown arrow shown at #4 in the Find Duplicate References message box above.
The macro does a two-pass search, one from the beginning of the reference and another from the end of the reference, which is why a list of duplicates may have repetitions.
The results of the search appear like this:
List of Possible Duplicate References
(They appear as tracked changes only if the macro is run with Tracking on; if Tracking is off, the results appear as normal text.) Note the title of the duplicates is “Duplicate Entries (Nondefinitive).” The reason for “Nondefinitive” is to remind you that the macro is “dumb” and there is no guarantee that the list includes all duplicates or that all listed items are duplicated. Much of the macro’s accuracy depends on the consistency of editing, including formatting.
For the examples in this essay, the Find Duplicate References macro was run on a list of 735 references and the list of possibilities shown represents those likely duplicate references the macro found. Note that references 19 and 78 were found (#19 and #78 indicate the portions of those references found duplicated by each pass of the macro); however, if, for example, in editing the page range separator in #19 was left as an en-dash in reference 19 and in reference 78 as a hyphen, the macro would not have listed the material at #19 as there would not have been a match. Similarly, if the author name in reference 19 had been left as “Infant” and in reference 78 as “Infantile”, the macro would not have listed the material at #78 as there would not have been a match.
The next step is for the editor to determine which of the listed possibilities are duplicates. This is done using Word’s Find Navigation pane, as shown here:
Verifying Duplicate References
Copy part or all of what was found (#1) into the Find field (#2). Find will display the search results (“3 matches”) (#3); clicking the Browse button (the rightmost button at #3) lists the three matches found (#4 to #6). The first entry (#4) is always the text in the duplicates list (#1), which means that, in this example, the possible duplicates are #5 and #6. Clicking on the text marked #5 to see the complete text of that entry. Then compare that text to the text of the reference at #6. (It is possible for the macro to find more than two possible matches for the same text — and all, some, or none may be duplicates.)
The Inserted Comment
When editing of the manuscript is finished, have the Reference Number Order Check macro export a renumbering report to send with the edited file to the client. A partial sample report is shown here:
Sample Partial Renumbering Report
Every report bears the creator’s identification information (#1) and file title (#2). You set the creator information once and it remains the same for every report until you change it using a manager. The file title is set each time you create a report.
As the report shows, reference 78 was deleted and all callouts numbered 78 were renumbered as 19 (#3). The prewritten, standard message (a new feature) can be inserted with a mouse click; only the numbers need to be inserted or modified. The report shows that the renumbering stopped at callout 176 (#4) and started again at 197 (#5). Number 6 shows another deletion and renumbering.
Clients like these reports because it makes it easy for authors, proofreaders, and others involved in the production process to track what was done.
The Find Duplicate References macro is a handy addition to EditTools. While it is easy in very short reference lists to check for duplicate references, as the number of references grows, checking for duplicates becomes increasingly difficult and time-consuming. The Find Duplicate References macro saves a lot of time, thereby increasing an editor’s profits.
Richard Adin, An American Editor
Share this:
Like this: