The Business of Editing: The AAE Copyediting Roadmap VIII

Although it seems from the volume of the posts (this being the eighth in the series) that I have spent a lot of time on the manuscript but not gotten very far along the road, the opposite is truer: All that has gone before, with the exception of editing the reference list, took very little time. It takes longer to describe my steps than to perform them.

Each of the previous steps were necessary in my methodology as preludes to getting me to the point where I actually edit the manuscript. Now it is time to discuss some of the things done while actually editing the manuscript. I begin with reference renumbering.

Reference Renumbering

Not all manuscripts require reference renumbering, but a significant number do. The last major project I completed had 82 chapters made up of 10,000 manuscript pages and thousands of references (several chapters had more than 1000 references and many had between 500 and 900 references; the entire project had more than 21,000 references). Of those 82 chapters, 76 required reference renumbering; quite a few required renumbering beginning within the first 10 references (and one chapter had a half-dozen references that had to be inserted before reference 1).

Even if it turns out that a chapter’s references do not require renumbering, I need some way to make sure that references are called out in order; it is not unusual to have earlier references recalled out so that there is a sequence like this: 21, 22–24, 25, 26, 23, 27. I used to try to track the reference numbering and renumbering using pencil and paper; then I graduated to using an Excel spreadsheet. Both methods worked but they were cumbersome and time consuming. In addition, there wasn’t an easy way, in a chapter that required extensive renumbering, to quickly and easily track the renumbering.

Below is a sample page from a report generated by the References # Order Check macro (you can make the image, as well as other images in this essay, larger by clicking on the image). The format of the report is as follows: In the first shown entry (53,60), 53 is the original reference number as assigned by the author and found in the original reference list; 60 is the renumber value, that is, what was once numbered 53 is now renumbered as 60. As you look at the sample, you will see some numbers are followed by explanatory comments. If you would like to see the complete report, it is available for download from wordsnSync. The file is a PDF named Sample Reference Renumbering.

Reference Renumber Report

Reference # Order Check

The way I track references now is with EditTools’ Reference # Order Check macro, shown here:

The Renumbering Macro Dialog

For details on how this to use this macro, see Reference # Order Check. For purposes of this essay, there are only a couple of things to note. First, when I come to a reference callout in the text, assuming it does not need renumbering or a comment, I click on the corresponding number in the left numbering field (#A in image above). Doing so let’s me track what the next callout number should be. For example, if I have clicked on 1 to 7, I know the next numbered callout should be 8. If it is, I click 8; if instead it is 10, then I know I need to renumber. Renumbering is done by clicking in the blank field next to the number 10 in the main Renumber: field (#B in image). That will put the 10 in the Original: field (#C in image) and I enter its new number — 8 — or a comment or both in the Renumber: field (also at #C) and click Modify. The new number or the comment or both will appear in the main field (#B) opposite 10, and 8 will be removed from the left numbering field (#A). If the next callout is number 8, I repeat the renumbering process and renumber 8 as 9. And so it goes.

The Reference # Order Check macro does much more to help with numbering/renumbering, but a discussion of what else it does isn’t needed here. Take a look at the report the macro generates (see the complete Sample Reference Renumbering); I send a report to the client with every chapter/manuscript that requires reference list renumbering.

Managers on the Desktop

I do one more task before beginning actual editing: I open Bookmarks and the Managers for Toggle Word and Toggle Word Specialty. I also open Click List. I keep these open on one of my monitors (I use a three-monitor setup) because these are things I access frequently. With some projects, I also keep open the Never Spell Word Manager. In a large project, I will keep the NSW Manager open as I edit the early chapters, but with later chapters, I only open it when needed.

Bookmarks have already been discussed (see The Business of Editing: The AAE Copyediting Roadmap IV). Click List lets me insert items with a single click. Take a look at the Click List image below. In the image, the Symbols tab is showing. Before Click List, if I needed to insert a division sign (÷), I had to open Word’s Symbol dialog, search for the symbol, and double-click it to insert it into the document. It took time — sometimes a lot of time, sometimes only a little time — to find the symbol I needed. With Click List, I do that search once, add the symbol and my own name for it using the Click List Manager, and thereafter I insert it with a single mouse click from Click List. The Click List can be used for just about anything, from a symbol (e.g., ä or ≈ or Ǻ) to a lengthy phrase (e.g., including the opening space, “ of total antigen per dose” or “References for this chapter are available at Xxxxx.com.”). Click List is an excellent example of creating the wheel once and reusing it.

Symbols Tab in Click List

Toggle Word

Of all the macros I use during editing, none is more valuable than the Toggle Word macro. The Managers for Toggle Specialty and Toggle Word are shown here:

Toggle Word and Toggle Word Specialty Managers

The Toggle macro lets me select a word or phrase or acronym/initialism and change it quickly, easily, and, most importantly, accurately. Although I can type, I still make lots of typing errors. For example, it isn’t uncommon for me to type chatper instead of chapter. In that case, autocorrect takes care of the error, but things get dicier when I need to type N,N-diethyl-3-methylbenzamide. I may not notice a mistyping, which would be a tragedy, but even more tragic — for me — is the time I need to spend to type it, check it to make sure it is correct, and correct it if wrong. A couple of clicks is much better — quicker, easier, more accurate, and profit-enhancing.

Toggle works with tracking on, so I can undo at any time. Toggle also can give me options. For example, N,N-diethyl-3-methylbenzamide is the chemical name for DEET. When I am editing a manuscript, my clients want acronyms and initialisms spelled out at first mention (unless the style dictates that a particular acronym/initialism does not have to be spelled out, which is usually the case with, e.g., HIV/AIDS). So, when I come across the first instance of DEET in the manuscript, I place my cursor in or I select DEET and press my shortcut key for Toggle. The following dialog then appears:

Toggle Can Offer Options

Toggle displays my options based on what I have entered in the dataset. (If there are no options, it just makes the change that is in the dataset.) It is important to note that Toggle checks all of the datasets that appear in the Toggle Manager as well as the designated Toggle Specialty dataset, not just the dataset for the topmost tab. The image of the Toggle and Toggle Specialty Managers above shows 11 datasets — one for each tab plus the specialty — and when I run Toggle, it checks all of them for the selected word and displays all of the options. I choose the option I want and click OK. The word or phrase is replaced, no typing involved.

I keep the Toggle and Toggle Specialty Managers open as I edit so I can add new words to the datasets. The idea is to create the wheel once and reuse it; Toggle is a macro that lets me do that during editing.

Hotkeys: Worth Noting & Doing

EditTools macros are intended to make editing quicker, easier, more accurate, and more profitable. Consequently, easy access to regularly used macros is important. Most of the macros in EditTools can be assigned to keyboard shortcuts or Hotkeys. This is easily done by either clicking on the Setup Hotkey button, which is generally found at the bottom of a macro’s Manager, or by clicking the Hotkeys menu in the Preferences section of the EditTools toolbar.

I have assigned Hotkeys to those macros and managers that I use frequently. Because I keep the Toggle Word Manager open as I edit, it does not have an assigned hotkey — it is opened once and left open; in contrast, the Toggle macro is assigned a hotkey because it is not a macro that is (or can be) kept open but it is accessed frequently. Examples of other macros I have assigned to hotkeys are Enhanced Search, Count, & Replace; Smart Highlighter; and Insert Query. You can (and should) customize Hotkeys to fit your needs.

Moving On

Another macro I use often during editing is Enhanced Search, Count, and Replace, which is the subject of The Business of Editing: The AAE Copyediting Roadmap IX.

Richard Adin, An American Editor

Advertisement